What are the assembly steps of the Syringe Production Line? The assembly line is now more and more widely used, but what are the specific assembly steps? Today, the assembly line manufacturer answers this question for you.
What are the assembly steps of the assembly line? The assembly line is now more and more widely used, but what are the specific assembly steps? Today, the assembly line manufacturer answers this question for you.

Assembly line assembly step 1: Determine the longitudinal centerline of the assembly line

The longitudinal centerline of the equipment is determined according to the equipment drawing of the assembly line, which is the benchmark of the assembly line. In the field, the vertical centerline of the assembly line is usually drawn based on the field column network.

Assembly line assembly step 2: Determine the equipment adjacent to the longitudinal centerline of the assembly line

If the equipment related to the assembly line has been installed, the center line is determined according to the relative proportion of these adjacent equipment, and the relative proportion to the column network of the factory building is for reference only. In this way, you can ensure that the pipeline system can work reliably.

Assembly line assembly step 3: Install the assembly line drive system

First determine the assembled assembly line and center direction. According to the requirements of the equipment drawing, connect the frame with the support leg, install the assembly line transmission frame and motor, and then install the nylon zipper and chain, and then install the drive roller and redirecting sprocket. When installing, Make sure that the end faces of the two sprockets are on the same plane, and then adjust the direction of the motor to make the chain have a satisfactory tension.

Assembly line assembly step 4: Install the assembly line motor shield

Install assembly line motor guards, control system guards and assembly line guardrails.

Assembly line assembly step 5: Debug the assembly line equipment

Check the assembled assembly line and open the empty machine for adjustment. Part of the adjustment does not meet the planning requirements and standard requirements. During the adjustment process, check the tightness of the chain and the engagement between the chain and the drum sprocket. If it is improper, adjust it immediately.

If you want to have Syringe Mold, welcome to come and purchase!